Create a box around a lift station in a civil plane and it’s easy to imagine it as an independent piece of equipment.
In reality, water comes from somewhere, goes through the station, and is carried on to somewhere else. It also depends on the structural components, power, controls and access to the site.
A question that is useful for project teams looking for the most effective lift station designer is whether they consider the interfaces and not only what happens inside the station.
Image credit: romtecutilities.com
Commence upstream from the Wet Well
Imagine a home development. Wastewater flows through the collection system to the lift station. The elevation of the site as well as the incoming flow conditions determine the amount of waste the station can handle.
Once the wastewater has reached wet wells Another set of engineering decision-making begins. Pumps and piping, valves and controls, structural elements, and possibly additional components must be appropriate for the purpose.
Romtec Utilities engineers wastewater systems specifically designed for specific sites, including municipal, commercial, industrial, and development applications.
This is because the project-specific method is important since changes in what happens upstream may alter the way that the pumping system has to accomplish.
Keep an eye on the water beyond the Pumps
The problem does not end once the liquid is out of the well. Pumping systems need to be able to push the liquid to meet the hydraulic conditions of the downstream systems. The configuration of the pump as well as the flow requirements are affected by the flow requirements and required head conditions.
This is especially important when it comes to evaluating the top wastewater design. The specs of a pump are amazing, but their performance must be logical within the hydraulic system in general.
Romtec Utilities is able to create all the components which make up the pumping plant, such as the structure and mechanical components, as well as the electronic and the communication as a package. This allows us to coordinate the equipment required for the project.
Stormwater is its own network of Connections
Stormwater infrastructure differs. The runoff could enter a collection system through developed surfaces, before moving to detention, treatment or drainage infrastructure. The station is a link in the larger stormwater plan in the event that pumping is required.
For organizations searching for the best stromwater system designers, it is worth examining whether site conditions, flow rates, head requirements, environmental considerations, and the surrounding stormwater plan are evaluated together.
Romtec Utilities offers customized stormwater pumps for industrial, residential commercial, municipal and residential projects, as opposed to with a standard configuration.
Coordination Extends Above Ground Too
Not all interfaces involve pipes. Electrical service needs to be supported by the equipment. Control and communications systems have to be designed to fit the needs of the project. Contractors should be able to access the appropriate plans and documents. In the case of installation, startup or subsequent services, access to physical space may be required.
The system documentation is valuable because these connections may have multiple participants and disciplines. Romtec Utilities can provide complete plan of work and documentation, in addition to assistance to its systems during installation, testing, and commissioning.
Take a look beyond the station’s Boundary
A lift station may be designed correctly as a stand-alone facility but remain part of a badly coordinated project if its connections to the outside weren’t given sufficient attention.
The water can be a great design guide. Where does it originate? What conditions do it have to pass through to reach the station? What happens once it’s there? Where will it go? What infrastructure enables the entire process?
Answering those questions turns the concept of a lift station equipment project into an infrastructure engineering.